By the Members, of the Members & for the Members

TAGMA Tool Trial Centres

TAGMA INDIA is pleased to announce opening of its Tool Trial Centre at Chakan, Pune from June 2014 for Members and the Tooling Industry.

The Objective of the project is to upgrade the existing Tooling Industry in Pune by setting up of a Common Facility Centre (CFC) for the Tools, Moulds and Dies Industry. While the Centre proposes to house all key facilities for Tool Manufacturing, the main focus would be on those activities and services which are not available with the small and medium units like Tool trial and validation, calibration set up etc. In addition to the Tooling Industry, the Centre would serve towards the development of all the Manufacturing Clusters.

To start with the centre has setup two injection moulding machines i.e. Maxima Servo 500 and Maxima Servo 850 alongwith related ancillaries.

Injection Moulding Machines

Maxima Servo 500


Machine Specifications
Description Unit Value
Injection Capacity gm 1719
Injection Pressure bar 1918
Injection rates cc/sec 445
Injection screw stroke mm 360
Screw diameter mm 80
Screw speed rpm 180
Screw torque@172 bar Nm 4369
Clamp stroke mm 1475
Maximum daylight mm 1725
Minimum mould thickness mm 250
Maximum mould thickness mm 1000
Platen size (HxV) mm 1250x1250
Distance between Tie rods (HxV) mm 920x920
Tie rod diameter mm 145
Ejector stroke mm 250
Ejector force ton 11.7
Maximum Mould Weight ton 7.5
Air Ejection Stage 2
Hydraulic Core pull Stage 3
Hydraulic Mould Gate Valve Stage 4
Pneumatic Mould Valve Stage 4

Maxima Servo 850


Machine Specifications
Description Unit Value
Injection Capacity gm 3288
Injection Pressure bar 1896
Injection rates cc/sec 585
Injection screw stroke mm 440
Screw diameter mm 100
Screw speed rpm 160
Screw torque@172 bar Nm 6550
Clamp stroke mm 1850
Maximum daylight mm 2250
Minimum mould thickness mm 400
Maximum mould thickness mm 1200
Platen size (HxV) mm 1790x1470
Distance between Tie rods (HxV) mm 1390x1070
Tie rod diameter mm 195
Ejector stroke mm 250
Ejector force ton 18.2
Maximum Mould Weight ton 17.2
Air Ejection Stage 2
Hydraulic Core pull Stage 3
Hydraulic Mould Gate Valve Stage 8
Pneumatic Mould Valve Stage 8

Ancillary equipments & accessories

  • 3 HRS controllers each of 8 zones
  • 4 Water MTC of max heating capacity 120oC
  • 2 Dehumidifiers
  • Air Compressor
  • Chiller
  • Overhead crane of lifting capacity 10 T
For Details Contact
Plot No. C-20, MIDC, Chakan Industrial Area, Phase-1, Taluka: Khed, Dist: Pune, Chakan – 410 501
Name Mr. Ravikant Umrekar - Project Manager
Mobile No +91 - 9527689700
Email tagma.pune@tagmaindia.org