|
|
|
|
Volume: XXVI / No. 12 |
(Private Circulation For Members Only) |
August- 2018 |
|
|
In Focus
Industry 4.0 : Manufacturing’s Next Move
According to recent reports, there will be 50 billion connected devices by 2020. The Internet of Things (IoT) is spreading its divisions across diligences, organisations, utilities, homes, and almost everywhere. IoT is set to play an important role in the next Industrial Revolution. It will enable a new form of analytics to analyse a massive cloud of dynamic, ever changing information and offer information that can be used for operative and analytical purposes. Its very first and greatest impact is expected to be in the industrial sector, where organised change is more feasible compared to sectors where the consumer is directly involved… Read More |
|
In Conversation With
“We need to create indigenous IoT devices that are cost effective and reliable”
During an interaction with Nishant Kashyap, Asim Tewari, Professor (Mechanical Engineering), Indian Institute of Technology Bombay (IITB) and Professor-in-charge, NCAIR talks about IoT in manufacturing, creating awareness and the need to look at indigenous solutions which can serve the purpose and are cost effective at the same time...
Read More |
|
Leaders Speak
"Better hand-holding from the OEMs might help the Indian tool rooms"
OEMs and Indian tool rooms should come under a platform to discuss the need gap. While OEMs can highlight the challenges, they face while sourcing from the Indian tool rooms, the tool rooms can put across their expectations from OEMs and understand their requirement better,” says Chandramohan Natarajan, Wholetime Director, Craftsman Automation Ltd, India....
.Read More |
|
Tips & Tricks
8 Common Insert Failures and How to Address Them
If you don’t know much about insert failure and its negative impact on your manufacturing equipment, it’s similar to an athlete exhausting a good pair of running shoes. Much like a shoe under the weight of the runner wearing it, an insert endures tremendous stress over and over again; creating wear and tear. If not addressed, wear can cause pain for an athlete and inaccurate processes or poor productivity for a manufacturer...Read More |
|
Event report
TAGMA and MAZAK organises
seminar on ‘Latest Trends in manufacturing
Leading CNC manufacturer Yamazaki MAZAK and Tool and Gauge Manufacturers’ Association (TAGMA) jointly organised a seminar, ‘Latest trends in manufacturing’. Held on August 23, 2018 at Vasai in Mumbai, the event aimed to bring together the tool and die makers in the nearby areas. The event highlighted the latest technologies available for die mould manufacturing. Technologies like complex surface fi nish machining solutions, Industry 4.0 and additive manufacturing solutions formed a major part of the seminar.
Read More |
|
Case Study
KOMET® GROUP innovates
cutting tools using metal 3D
printing technology
KOMET® GROUP is using Renishaw metal
additive manufacturing technology to produce
new ranges of innovative cutting tools. As well
as allowing special cutters to be produced more
quickly, the use of additive manufacturing enables
more complex shapes to be generated, both for the
external shape of the tooling and for the internal
cooling channels Read More |
|
Editorial
Beyond Assembly Line
Manufacturing is getting a facelift, thanks to Industry 4.0,
designed to make the process more efficient, flexible
and connected. A confl uence of disruptive digital
technologies, Industry 4.0 promises growth, and a
fi ghting chance in the international arena.
Read More
|
|
Industry Update
- Introducing Makino’s New UP6 HEAT Wire EDM Designed for Ultra Precision Machining
- Seco Partners with MachineMetrics to Off er Manufacturing Analytics
- Meusburger Presents the smallest ready-to-use slide
- Milacron’s success continuous in Low Pressure Injection Moulding (LPIM) Structural
Foam machine
Read More
|
|
Case Study
Powershape® and Powermill® help Pars
Tekhnologies reduce cycle time by 40%
Read More
|
|
Interesting Facts
A majority of people (87%) have not heard of the term ‘Internet of Things’. Read More
|
|
|
|
This email was sent to %%Subs%%by TAGMA India
unsubscribe from this list
A-33, NandJyot Industrial Estate Safed Pool, A.K. Road, Mumbai - 400 072 |
|