In Focus |
The Virtual Network
In the time of social distancing, social media has come to the rescue and
has become a necessary tool for businesses that want to stay relevant
and gain exposure online. The technique for choosing the right social
media platform for your business is knowing which ones will work best.
Read More
|
|
Machining Mantra |
Future of Manufacturing –
5-Axis Machines
I
n the traditional mould machining industry, it is
common to use 3-axis machines such as vertical
machining center and double-column machining
center to cut metal. With the advancement of
machining technology and mould requirements,
some pros and cons have been identified in mould
manufacturing.
Read More
|
|
Tool Talk
|
‘Strategy has a positive and significant
effect on an organisation’s performance’
“In the tooling industry, close to 90%
of the Entrepreneurs/ Managers
spend about 70-80 % of the time in
the day-to-day operations (Tactical)
and less than 15-20 % of the time
in strategic thinking. Those who
spend at least 10-15% of their time
in cultivating the habit of strategic
thinking within an organisation
can improve operational efficiency
& resource optimisation by a
minimum of 25-30%,” says Narendra
Brahmankar, IRCA registered QMS
Principal Auditor Trainer, Business
Coach, and Consultant."
Read More
|
|
Rewinding 2021 |
Major events that rocked the Indian manufacturing industry in 2021
Automotive is an important part of the Indian economy and acts as a trendsetter for its current state. A dire fall in commercial vehicle (CV) sales indicated approaching economic challenges in 2012 and 2019.
A steep rise in twowheeler and passenger vehicle (PV) sales was an announcer of good financial news in 2010.
Read More
|
|
Case Study |
Keeping Everything in Check
PolyWorks® Cuts the Symmetry and Alignment Check
Time on Bombardier’s CRJ Series by 75%
As the airplane touched down on the
runway, an unexpected force of impact
with the ground resulted in what is
commonly referred to in the aviation
industry as a “hard landing”. Considered a frequent
incident, each pilot is expected to experience at
least one hard landing over the course of their
career. Whether due to meteorological conditions,
mechanical problems, an overweight aircraft, pilot
error, etc., a hard landing can vary in seriousness
from simply causing mild passenger discomfort to
resulting in extensive damage to an airplane. So
when a hard landing occurs, the airplane must be
checked for structural damage before its next flight.
At Bombardier Aerospace, this is where the Ground
Support Equipment team comes in.
Read More
|
|
Techno Focus |
Convenient, networked and
sustainable: New solutions for
charging electric Volkswagen models
Volkswagen is the first high-volume manufacturer
to offer its customers a universal and seamless
ecosystem for charging their electric models.
The service with the name ‘We Charge’ will be
enhanced step-by-step to offer higher performance,
convenience and sustainability – with new charging
solutions for home and mobile charging, new functions
in the ID. models, and soon also with the technology of
bidirectional charging.
Read More
|
|
Industry Updates |
- Have you considered the benefits of bar peeling?
- IHigh-performance universal gripper
- Tungaloy’s AH3225 insert grade further enhances shoulder milling
performances
- Q2 GDP number encouraging; Need to maintain uptick in demand by extending
further support: FICCI
- MSMEs crucial for generating employment; Industry should work towards
propelling manufacturing to reduce imports
- Dassault Systèmes signs MoU with Tamil Nadu Industrial Development
Corporation to set up 3DEXPERIENCE Innovation Center for startups and MSMEs
- ECLGS helped many small businesses sail
through financial woes: Survey
- Toshiba Johnson Elevators
secures to supply 168 elevators
- Retail auto sales stayed stuck in the slow lane in November: FADA
- Tata Motors delivers 60 Ultra Urban 9/9 electric buses to Ahmedabad
Janmarg Limited
- Siemens partners with Hyundai Motor Company and Kia Corporation for Digital
Mobility Transformation
- Hyundai to invest $530 million to launch six EVs in India by 2028
Read More
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Patron Members |
- USBCO STEELS PVT. LTD.
- HUSKY INJECTION MOLDING SYSTEMS PVT. LTD.
Read More
|
|
|
|
|
|
|
|