By the Members, of the Members & for the Members

ITS 2019 Concludes on a high note - Underlines Opportunity in Indian Tooling Industry

India’s largest die mould gathering, International Tooling Summit (ITS) took place at Hotel Hyatt Regency, Pune on 7th and 8th February 2019. In its fourth edition, the event revolved around the theme, “Indian Tooling Industry: Forming & Moulding the Future”. The two-day event saw four panel discussions, 16 technical sessions, with abh0out 40 speakers discussing various topics that impact the Indian tooling industry. Overall, ITS 2019 aimed to highlight the latest technology trends, business dynamics, opportunities, challenges and the future outlook.

The two-day conference was inaugurated in the presence of the Chief Guest - Mr. Sunil Kakkar, Executive Director (Supply Chain), Maruti Suzuki India Ltd; Guest of Honor Mr. Saurabh Kumar, DGOF & Chairman, Ordnance Factory Board and Ms. Laxmi Laxman, General Manager, PCK Buderus (present on behalf of Peter Vetter, Head, Quality Planning Tool Steels, Buderus Edelstahl; Mr. N Reguraj, MD – NTTF and Founder President, TAGMA India; Mr. D K Sharma, President, TAGMA INDIA and Mr. D Shanmugasundaram, Vice President, TAGMA India


Welcoming over 400 professionals from around the world, Mr Sharma said, “I am delighted to share that in just four years, ITS has become one of the most important a platform for the Indian tool room professionals for knowledge sharing, understanding global trends, and building acquaintances. Today, with an increase in demand from the automotive and consumer industries, the Indian tooling sector is witnessing rapid growth. The total tooling demand for FY17 in India was USD 2070 million and is expected to reach USD 2683 million by FY 2020 with the CAGR of 9%. This is a good time to be a tool maker in India, we must celebrate this occasion and gear up for the future opportunities.”

Sharing his views, Mr. Kakkar said, “At present, the Indian automotive industry contributes 7.5% to the Indian GDP and 49% in Indian manufacturing industry’s GDP. It is set to grow further thanks to the rising income, increasing population and better infrastructure. We all, everyone related to eco-system, need to work together and contribute towards this growth. To be competent, localisation is the key. Today, 75% of our tools are sourced from domestic suppliers and we want to increase this even further. We expect you to supply world-class tools and help us in saving cost and time.”

Ms Laxmi addressed the gathering on behalf of Mr Vetter and delivered his message. She highlighted the changing dynamics of the automotive industry and how the usage of new materials in the future automobiles will pose challenges to tool makers.

It was followed by a speech from Mr Kumar who spoke about the current happenings in the Indian defence sector, activities of the ordnance factory and opportunities for tool makers. “We need a large number of tools for cold rolling, forging, plastic moulds, sheet metal, and fixtures solutions, among others. I invite you all to visit our factories and understand about our requirement” he said.

The inauguration speeches were followed by felicitation of Mr N Reghuraj. He was presented the life time achievement award by TAGMA India during the event.

Further, Mr Ashim Sharma, Partner & Group Head, Business Performance Improvement Consulting (Auto, Engineering & Logistics), Nomura Research Institute India Pvt. Ltd. presented an overview of the tooling industry.

ITS 2019 was action-packed. There were thought-provoking panel discussions and technical sessions strategically organized on both the days. Topics like ‘OEMs and Tooling Suppliers - Collaborative Approach’; ‘Subtractive & Additive Technologies – How Will The Coexistence Emerge In Future?’; ‘Emerging Sectors for Indian Tool Makers’ and ‘Changing Dynamics in Auto Sector - Impact on Indian Tooling Industry’ were part of the panel discussions.

Technical sessions like ‘Overview on global toolmakers in Asia, Europe and US/Canada and how Indian toolmakers can reach to their standards’ by Mr. Dirk Soltau, Head of Chemi- Kaufteilemanagement – Beschaffung, Volkswagen; ‘New Trends in Die Making a) Electronic In-die Tapping and b) Wireless Pressure Monitoring Systems for Gas Springs’ by Mr. Jochen Schaefer - Director Business Area Standard Parts, FIBRO GmbH; ‘Future Of Making’ by Mr. Pankaj Gauba, Head Digital Manufacturing Group, India & Middle East, Autodesk; ‘Today's Solution for Tomorrow's Challenges’ by Mr. T.S. Gopalakrishnan, Director, Multiple Special Steel Pvt Ltd; ‘Futuristic Technologies related to Tooling’ by Mr. Abhinav Shah - Customer Technical Support, Madhu Machines & Systems Pvt. Ltd;‘Hot Runner Systems - New Developments & Solutions for Automotive Segment’ by Mr. Vishal Agarwal – President, Yudo Hot Runner India Pvt. Ltd; ‘Application orientated development of special steel products at Deutsche Edelstahlwerke’ by Mr. Christoph Mueller - Technical Customer Services Tool Steels, Deutsche Edelstahlwerke Specialty Steel GmbH & Co. KG; ‘A look into the 2K Mould Technology’by Mr. Alan Cecco, Design Director, Silver Basis Group; ‘Manufacturing Excellence in Tool Room’ by Mr. Suryakant Kisan Pawar - Joint General Manager, Larsen & Toubro; ‘Scientific Cooling for Injection Moulding’ by Mr. Mark Brown – Founder, Burger & Brown Engineering; "Future Needs Steel" by Mr. Ashish Bhansali – Director, Anand Mould Steels Pvt. Ltd; ‘Innovative Hydraulic Solutions for injection & Die-casting moulds’ by Mr. Abhinav Shah - Customer Technical Support, AHP Merkle; ‘Solutions for Die-casting and Plastic Injection Moulding using Integrated Additive Manufacturing’ by Mr. Günther Prunner - Regional Innovation Manager, Voestalpine; ‘How CADOpt can help Tool & Die Industry by providing solutions using 3D and Automation’ ; Mr. Raghavendra M.S, Head- Services, CADOpt Technologies Private Limited; Smart Manufacturing in Tool Rooms for Improved Productivity, Quality and Delivery’by Prof. Asim Tewari, Chair Professor in the Dept. of Mechanical Engg and Head of the NCAIR at, IIT, Bombay; ‘Hot Press Forming & Aluminium Stamping : Application & Challenges’ by Mr. Woosik Jeong - General Manager, Stamping Tool Engg, Shin Young Co. Ltd. and ‘Critical aspects in Skin Panel Dies’by Mr. Martin Heckmann, Development Engineer, LÄPPLE Automotive among others were also held during the event.

During the networking dinner in the evening of day-one, TAGMA felicitated industry veterans Mr. Surendranath Narayan Pulyadath, Mr Anand Kumar Seth, Mr P Goyal and Mr Naresh Janardan Raut for their contribution to the industry.

During these two days, various companies showcased their state-of-the-art technology through technical sessions and stalls at the event that targets companies and professionals associated with die mould industry. The thought provoking panel discussions also helped the professionals present at the event understand the latest in technology, customer expectations, opportunities and the challenges in front of the Indian tooling industry.

The fifth edition of ITS will take place in February 2020 at New Delhi. Stay Tuned!